Product ID:J B ALLOY, AWS I100
MSDS Date:05/19/1994
FSC:3439
NIIN:00N054031
MSDS Number: BVWCT

J B ALLOY CORP

330 S 66TH ST
HOUSTON, TX 77011
US

Emergency Phone: 713-926-3232

Info Phone: 713-926-3232

Cage: IO893

J B ALLOY CORP

HOUSTON, TX 77011 US

Telephone: 713-926-3232

Cage: IO893

ALUMINUM (SARA III)

CAS: 7429-90-5

RTECS: BD0330000

OSHA PEL 15 MG/M3 DUST;5 FUME

ACGIH TLV: 10 MG/M3 DUST

COPPER (SARA III)

CAS: 7440-50-8

RTECS: GL5325000

OSHA PEL 0.1MG/M3 FUME;1 DUST

ACGIH TLV: 0.2 MG/M3 FUME

EPA Report Quantity: 5000 LBS

DOT Report Quantity: 5000 LBS

IRON

CAS: 1309-37-1

RTECS: NO7400000

OSHA PEL 10 MG/M3 (FE)

ACGIH TLV: 5 MG/M3 (FE) FUME

MAGNESIUM

CAS: 1309-48-4

RTECS: OM3850000

OSHA PEL 10 MG/M3

ACGIH TLV: 10 MG/M3, FUME

MANGANESE (SARA III)

CAS: 7439-96-5

RTECS: OO9275000

OSHA PEL 5 MG/M3, C

ACGIH TLV: 5 MG/M3, DUST

SILICON

CAS: 7440-21-3

RTECS: VW0400000

OSHA PEL 10 MG/M3 TDUST

ACGIH TLV: 10 MG/M3 TDUST

TIN

CAS: 7440-31-5

RTECS: XP7320000

OSHA PEL 2 MG/M3

ACGIH TLV: 2 MG/M3

ZINC

CAS: 1314-13-2

RTECS: ZH4810000

OSHA PEL 15 MG/M3 TDUST

ACGIH TLV: 10 MG/M3 TDUST

USED.OTHER CNDTNS WHICH ALSO INFLUENCE

RTECS: 9999999ZZ

OSHA PEL N/K

ACGIH TLV: N/K

COATINGS ON METAL BEING WELDED (SUCH

RTECS: 9999999ZZ

OSHA PEL N/K

ACGIH TLV: N/K

& VOL OF WORK AREA, QUALITY & AMT OF VENT, POSITION

RTECS: 9999999ZZ

OSHA PEL N/K

ACGIH TLV: N/K

PRESENCE OF CONTAMS IN ATMOSPHERE (SUCH AS

RTECS: 9999999ZZ

OSHA PEL N/K

ACGIH TLV: N/K

ACTIVITIES). WHEN ELECTRODE IS CONSUMED, FUME & GAS

RTECS: 9999999ZZ

OSHA PEL N/K

ACGIH TLV: N/K

INGS LISTED. FUME & GAS DECOMP PRODS, & NOT INGS IN

RTECS: 9999999ZZ

OSHA PEL N/K

ACGIH TLV: N/K

COMPONENT MAY DECREASE/INCR BY MANY TIMES ORIGINAL

RTECS: 9999999ZZ

OSHA PEL N/K

ACGIH TLV: N/K

FORM. DECOMP PRODS OF NORM OPER INCL THOSE

RTECS: 9999999ZZ

OSHA PEL N/K

ACGIH TLV: N/K

SHOWN IN ING SEC,PLUS THOSE FROM BASE METAL &

RTECS: 9999999ZZ

OSHA PEL N/K

ACGIH TLV: N/K

OF PRODS SHOULD INCL PRIMARILY OXIDES OF IRON,

RTECS: 9999999ZZ

OSHA PEL N/K

ACGIH TLV: N/K

MOLYBDENUM & VANADIUM. PRESENT OSHA PEL FOR

RTECS: 9999999ZZ

OSHA PEL N/K

ACGIH TLV: N/K

WILL RSLT IN SIGNIFICANT REDUCTION FROM 5 MG/M3 GEN

RTECS: 9999999ZZ

OSHA PEL N/K

ACGIH TLV: N/K

& CARBON DIOXIDE.OZONE & NITROGEN OXIDES MAY BE

RTECS: 9999999ZZ

OSHA PEL N/K

ACGIH TLV: N/K

ARGON AND HELIUM WHENEVER THEY ARE EMPLOYED.

RTECS: 9999999ZZ

OSHA PEL N/K

ACGIH TLV: N/K

INCLS WELDER'S GLOVES & PROT FACE SHIELD,

RTECS: 9999999ZZ

OSHA PEL N/K

ACGIH TLV: N/K

WELL AS DARK SUBSTANTIAL CLTHG.TRAIN WELDER NOT TO

RTECS: 9999999ZZ

OSHA PEL N/K

ACGIH TLV: N/K

AND GROUND.

RTECS: 9999999ZZ

OSHA PEL N/K

ACGIH TLV: N/K

LD50 LC50 Mixture:NONE SPECIFIED BY MANUFACTURER.
Routes of Entry: Inhalation:YES Skin:NO Ingestion:NO
Reports of Carcinogenicity:NTP:NO IARC:NO OSHA:NO
Health Hazards Acute and Chronic:FUMES & GASES CAN BE DANGEROUS TO YOUR
HLTH. ARC RAYS CAN INJ EYES & BURN SKIN. ELEC SHOCK CAN KILL.
SHORT-TERM OVEREXP TO WELDING FUMES MAY RSLT IN DISCOMFORT SUCH AS:
DIZZ, NAUS,OR DRYNESS/IRRIT OF NOSE, THROAT,OR EYES, TIGHTNESS IN
CHEST,FEVER & ALLERGIC RXNS. LONG-TERM (CHRONIC) OVEREXP TO WELDING
(EFTS OF OVEREXP)
Explanation of Carcinogenicity:NOT RELEVANT.
Effects of Overexposure:HEALTH HAZARDS: FUMES MAY LEAD TO SIDEROSIS
(IRON DEPOSIT IN LUNGS) AND IS BELIEVED BY SOME INVESTIGATORS TO
AFFECT PULMONARY FUNCTION.
Medical Cond Aggravated by Exposure:NONE SPECIFIED BY MANUFACTURER.

First Aid:INHALATION: REMOVE TO FRESH AIR, OBTAIN MEDICAL ATTENTION.
EMPLOY FIRST AID TECHNIQUES RECOMMENDED BY AMERICAN RED CROSS.
INGESTION: CALL MD IMMEDIATELY . SKIN: FLUSH WITH COPIOUS AMOUNTS
OF WAT ER . EYE: FLUSH WITH WATER FOR ATLEAST 15 MINUTES .

Extinguishing Media:USE MEDIA SUITABLE FOR SURROUNDING FIRE CONDITIONS
.
Fire Fighting Procedures:WEAR NIOSH/MSHA APPROVED SCBA AND FULL
PROTECTIVE EQUIPMENT .
Unusual Fire/Explosion Hazard:WELDING ARC AND SPARKS CAN IGNITE
COMBUSTIBLES AND FLAMMABLES.

Spill Release Procedures:NOT APPLICABLE.
Neutralizing Agent:NONE SPECIFIED BY MANUFACTURER.

Handling and Storage Precautions:USE EXHAUST SYSTEM TO CLEAR WELDING
FUMES. MAKE SURE THAT INHALED AIR DOES NOT CONTAIN FUME
CONSTITUENTS ABOVE PERMISSIBLE EXPOSURE LEVELS.
Other Precautions:OTHER PRECS FOR ADDNL SAFETY INFO ON WELDING &
CUTTING, SEE AMERICAN STD Z49.1 1983 SAFETY IN WELDING & CUTTING, &
WELDING HANDBOOK, VOL 1, CHAPTER 9, SAFE PRACTS IN WELDING &
CUTTING,BOOK AVAIL FROM AMERICAN WELDING SOCIETY, INC.,(SUPDAT)

Respiratory Protection:USE NIOSH/MSHA APPROVED RESPIRABLE FUME
RESPIRATOR OR AIR SUPPLIED RESPIRATOR WHEN WELDING IN CONFINED
SPACE OR WHERE LOCAL EXHAUST OR VENTILATION DOES NOT KEEP EXPOSURE
BELOW RECOMMENDED EXPOSURE LIM IT.
Ventilation:USE ENOUGH VENT, LOC EXHST AT ARC, OR BOTH, TO KEEP FUMES &
GASES FROM WORKER'S BRTHG ZONE & GEN AREA. TRAIN (SUPDAT)
Protective Gloves:WELDER'S GLOVES.
Eye Protection:WEAR HELMET/USE FACE SHIELD WITH(SUPDAT)
Other Protective Equipment:WEAR HAND, HEAD, & BODY PROT WHICH HELP TO
PVNT INJ FROM RADIA, SPARKS, & ELEC SHOCK.SEE ANSI Z49.1.AT MIN
THIS (ING 23)
Work Hygienic Practices:NONE SPECIFIED BY MANUFACTURER.
Supplemental Safety and Health
OTHER PREC:550 N. W. LE JEUNE ROAD,P.O. BOX 351040,MIAMI, FL
33135.VENT: WELDER TO KEEP HIS HEAD OUT OF FUMES.EYE PROT: FILTER
LENS.PROVIDE PROT SCREENS & FLASH GOGG, IF NEC, TO SHIELD OTHERS.
AS RULE OF THUMB START W/SHADE THAT IS TOO DARK TO SEE WELD ZONE.
THEN GO TO NEXT LTR SHADE WHICH GIVES SUFF VIEW OF WELD ZONE.

HCC:N1
Appearance and Odor:NONE SPECIFIED BY MANUFACTURER.

Stability Indicator/Materials to Avoid:YES
NONE.
Stability Condition to Avoid:NONE SPECIFIED BY MANUFACTURER.
Hazardous Decomposition Products:COMPOSITION & QUALITY OF WELDING FUMES
& GASES ARE DEPENDENT UPON METAL BEING WELDED, PROCESS, PROC,&
ELECTRODES (ING 9)

Waste Disposal Methods:PREVENT WASTE FROM CONTAMINATING SURROUNDING
ENVIRONMENT. DISCARD ANY PRODUCT RESIDUE, DISPOSABLE CONTAINER OR
LINER IN AN ENVIRONMENTALLY ACCEPTABLE MANNER IN FULL COMPLIANCE
WITH FEDERAL, STATE AND LOCAL REGULATIONS.

Disclaimer (provided with this information by the compiling agencies):
This information is formulated for use by elements of the Department
of Defense. The United States of America in no manner whatsoever,
expressly or implied, warrants this information to be accurate and
disclaims all liability for its use. Any person utilizing this
document should seek competent professional advice to verify and
assume responsibility for the suitability of this information to their
particular situation.